Proper maintenance can extend the service life of the sauna room, heating equipment, and electrical components while ensuring a safe and comfortable sauna experience.

1. Cleaning After Use
   Keep Good Ventilation
   Open the sauna door and ventilation vents after each use to release moisture.
   Avoid long-term humidity that may cause wood swelling, mold, or deformation.
   Clean Benches and Floor
   Wipe sweat and water stains with a clean damp towel.
   Regularly clean wooden surfaces with warm water and mild detergent.
   Do not use strong acidic or alkaline cleaners, as they may damage the wood.
   Keep the Sauna Dry
   Remove any standing water on the floor immediately.
   Do not leave wet towels or clothes inside the sauna room for a long time.
2. Wooden Sauna Maintenance
   Regularly check the wooden structure for:
   Cracks
   Warping
   Loose boards
   Mold or mildew
   For outdoor sauna rooms:
   Apply protective treatment to the exterior wood every 1–2 years.
   Check whether the waterproof coating is still effective.
   Note:
   Avoid painting the interior sauna wood, as high temperatures may produce odors or affect air quality.
3. Sauna Heater Maintenance
   Electric Sauna Heater
   Check power cables and electrical connections regularly.
   Inspect heating elements to ensure normal operation.
   Keep the area around the heater clean and free of objects.
   Wood-Burning Sauna Stove
   Clean ash regularly.
   Check the chimney for blockage.
   Inspect the stove door seal.
   Sauna Stones
   Check sauna stones every 3–6 months.
   Replace cracked or broken stones.
   Arrange stones properly to allow good air circulation.
4. Ventilation System Inspection
   Make sure air inlets and outlets are not blocked.
   Check ventilation performance:
   Fresh air circulation
   No unusual odors
   Moisture can escape effectively
5. Temperature Control System Maintenance
   Check that the thermostat display works properly.
   Avoid frequent power switching.
   If the sauna cannot heat properly or overheats, inspect:
   Heating elements
   Temperature sensors
   Electrical wiring
6. Maintenance During Long-Term Storage
   If the sauna room is not used for more than one month:
   Clean the interior thoroughly.
   Keep the door slightly open for ventilation.
   Disconnect the power supply.
   Check moisture protection and waterproof conditions.
   Recommended Maintenance Schedule
   Item
   Frequency
   Wipe benches and floor
   After every use
   Ventilation check
   After every use
   Sauna stone inspection
   Every 3–6 months
   Heater inspection
   Every 6 months
   Wood condition check
   Every 6 months
   Exterior wood protection
   Every 1–2 years
   Regular maintenance keeps your sauna room beautiful, safe, and efficient while extending its service life.